Study on the mechanism of catalytic synthesis of dimethyldichlorosilane by AlCl3/MIL‐53(Al)@γ‐Al2O3

Dimethyldichlorosilane, one of the most consumed organosilicon monomers in the industry, can be prepared in a highly efficient and environmentally friendly synthesis method of disproportionating methylchlorosilanes. However, the internal mechanism of the reaction remains unclear. In this paper, the mechanism catalyzed by AlCl₃/MIL‐53(Al) and AlCl₃/MIL‐53(Al)@γ‐Al₂O₃ catalysts was calculated at B3LYP/6‐311++G(3df, 2pd) level by using the density functional theory (DFT). The results showed that although the two catalysts had similar active structures, the catalytic effects were significantly different. The Lewis acid center on the surface of γ‐Al₂O₃ in the core‐shell catalyst is complementary to the classic Lewis acid AlCl₃ through the spatial superposition effect, which greatly improves the Lewis acid catalytic activity of AlCl₃/MIL‐53(Al)@γ‐Al₂O₃.     

污泥基吸附剂对亚甲基蓝和环丙沙星的吸附性能研究

亚甲基蓝和环丙沙星是水体中2种污染物, 对生态环境有潜在危害. 本文以市政剩余活性污泥为原料, 氯化锌为活化剂热解制备污泥基吸附剂, 研究盐酸酸洗浓度、氯化锌浓度、热解温度、热解时间等对污泥基吸附剂吸附水中亚甲基蓝和环丙沙星性能的影响. 结果表明 (1)污泥基吸附剂对亚甲基蓝的吸附性能随盐酸酸洗浓度的增大而增加, 对环丙沙星的吸附性能则随盐酸酸洗浓度的增大呈先降后增趋势, 两者均在1.500mol·L-1盐酸浓度下取得最优值. (2)污泥基吸附剂对亚甲基蓝和环丙沙星的吸附性能随氯化锌浓度和热解温度的增加呈先升后降趋势, 在氯化锌浓度为4.0mol·L-1、热解温度为500℃时有最优值; 随着热解时间的延长, 污泥基吸附剂对亚甲基蓝和环丙沙星的吸附性能分别在500℃热解70min和80min时有最优值. (3)污泥基吸附剂的最佳制备条件为 氯化锌4.0mol·L-1活化2h、500℃热解70min和80min、1.500mol·L-1盐酸酸洗; 以此制得的污泥基吸附剂对亚甲基蓝和环丙沙星的去除率分别为97.7%和96.4%, 平衡吸附量分别为97.9mg·g-1和3.9mg·g-1, 且污泥基吸附剂对亚甲基蓝和环丙沙星的吸附过程均符合准二级动力学方程.     

Generalized Jacobi spectral Galerkin method for fractional pantograph differential equation

This work is concerned with the extension of the Jacobi spectral Galerkin method to a class of nonlinear fractional pantograph differential equations. First, the fractional differential equation is converted to a nonlinear Volterra integral equation with weakly singular kernel. Second, we analyze the existence and uniqueness of solutions for the obtained integral equation. Then, the Galerkin method is used for solving the equivalent integral equation. The error estimates for the proposed method are also investigated. Finally, illustrative examples are presented to confirm our theoretical analysis.     

Enhanced thermal conductivity and mechanical properties of polymeric composites through formation of covalent bonds between boron nitride and rubber chains

Hexagonal boron nitride (BN) platelets, also known as white graphite, are often used to improve the thermal conductivities of polymeric matrices. Due to the poor interfacial compatibility between BN platelets and polymeric matrices, in this study, polyrhodanine (PRd) was used to modify BN platelets and prepared functionalized BN-PRd platelets, thereby enhancing the interfacial interaction between the thermal conductive filler and polymeric matrix. Then, BN-PRd platelets were dispersed into the nitrile butadiene rubber (NBR) matrix to yield high thermally conductive composites. The presence of N? C═S groups in PRd allowed the combination of PRd and NBR chains containing stable covalent bonds via vulcanization reaction. The thermal conductivity of the as-prepared 30 vol% BN-PRd/NBR composite reached 0.40 W/mK, representing an increment of 135% over pure NBR (0.17 W/mK). In addition, the largest tensile strength of NBR composite containing 30 vol% BN-PRd platelets was 880% times of pure NBR. The 30 vol% BN-PRd/NBR composite also displayed a relatively high dielectric constant (9.35 at 100 Hz) and a low dielectric loss tangent value (0.07 at 100 Hz), indicating their usefulness as dielectric flexible materials of microelectronics. In sum, the simplicity and good efficiency of formation of covalent bonds between boron nitride and rubber chains look very promising for large-scale industrial production of high thermally conductive composites.     

Biocatalytic Feedback-Controlled Non-Newtonian Fluids

Non-Newtonian fluids are ubiquitous in daily life and industrial applications. Herein, we report an intelligent fluidic system integrating two distinct non-Newtonian rheological properties mediated by an autocatalytic enzyme reaction. Associative polyelectrolytes bearing a small amount of ionic and alkyl groups are engineered: by carefully balancing the charge density and the hydrophobic effect, the polymer solutions demonstrate a unique shear thickening property at low pH while shear thinning at high pH. The urea-urease clock reaction is utilized to program a feedback-induced pH change, leading to a strong upturn of the nonlinear viscoelastic properties. As long as the chemical fuel is supplied, two distinct non-Newtonian states can be achieved with a tunable lifetime span. As a proof of concept, we demonstrate how the physical energy-driven nonequilibrium properties can be manipulated by a chemical-fueled process.     

Redox-Active Two-Dimensional Covalent Organic Frameworks (COFs) for Selective Reductive Separation of Valence-Variable,Redox-Sensitive and Long-Lived Radionuclides

We report the first example of 2D covalent organic framework nanosheets (Redox-COF1) for the selective reduction and in situ loading of valence-variable, redox-sensitive and long-lived radionuclides (abbreviated as VRL nuclides). Compared with sorbents based on chemical adsorption and physical adsorption, the redox adsorption mechanism of Redox-COF1 can effectively reduce the impact of functional group protonation under the usual high-acidity conditions in chemisorption, and raise the adsorption efficiency from the monotonous capture by pores in physisorption. The adsorption selectivity for UO₂²⁺ reaches up to unprecedented ca. 97 % at pH 3, more than for any analogous adsorbing material.     

Iridium-Catalyzed Enantioselective Hydrogenation of Oxocarbenium Ions: A Case of Ionic Hydrogenation

Ionic hydrogenation has not been extensively explored, but is advantageous for challenging substrates such as unsaturated intermediates. Reported here is an iridium-catalyzed hydrogenation of oxocarbenium ions to afford chiral isochromans with high enantioselectivities. A variety of functionalities are compatible with this catalytic system. In the presence of a catalytic amount of the Brønsted acid HCl, an α-chloroether is generated in situ and subsequentially reduced. Kinetic studies suggest first-order kinetics in the substrate and half-order kinetics in the catalyst. A positive nonlinear effect, together with the half kinetic order, revealed a dimerization of the catalyst. Possible reaction pathways based on the monomeric iridium catalyst were proposed and DFT computational studies revealed an ionic hydrogenation pathway. Chloride abstraction and the cleavage of dihydrogen occur in the same step.     

Origins of Boosted Charge Storage on Heteroatom-Doped Carbons

Although tremendous efforts have been devoted to understanding the origin of boosted charge storage on heteroatom-doped carbons, none of the present studies has shown a whole landscape. Herein, by both experimental evidence and theoretical simulation, it is demonstrated that heteroatom doping not only results in a broadened operating voltage, but also successfully promotes the specific capacitance in aqueous supercapacitors. In particular, the electrolyte cations adsorbed on heteroatom-doped carbon can effectively inhibit hydrogen evolution reaction, a key step of water decomposition during the charging process, which broadens the voltage window of aqueous electrolytes even beyond the thermodynamic limit of water (1.23 V). Furthermore, the reduced adsorption energy of heteroatom-doped carbon consequently leads to more stored cations on the heteroatom-doped carbon surface, thus yielding a boosted charge storage performance.     

Noise-induced phenomena in a versatile class of prototype dynamical system with time delay

Nonlinear Dynamics - This work presents a general class of prototype birhythmic dynamical systems, which can be extensively used to study the generation of complex bifurcation of limit cycles....     

Promotion of a quality standard for Porana sinensis Hemsl. based on the efficacy-oriented Effect-Constituent Index

Multicompound determination for the quality control of traditional Chinese medicine (TCM) may often be inadequate, since these compounds may not be associated with, or fully represent, the clinical effects of TCM. Moreover, the individual contributions of each constituent to the pharmacological effect are often not considered. In China, Porana sinensis is widely used as a substitute for Erycibe sources to treat joint pain and rheumatoid arthritis. The existing quality control methods for P. sinensis neither consider the individual contributions of various compounds nor control the actual quality associated with different clinical efficacies. In the present study, a novel efficacy-oriented approach, named the effect-constituent index (ECI), was established for P. sinensis. Analyses of the spectrum–effect relationship and components in rat plasma were conducted to systematically and scientifically select quality markers. Quantitative analysis of multicomponents via a single marker method was introduced to enhance the practical application value of the established ECI. The established ECI shows a good ability to distinguish and predict the bioeffect-based quality of P. sinensis. The present study also provides a reference for the establishment and application of ECI as a quality control method for TCMs.